Mercedes-Benz EQS 350 Operator's Manual page 232

Configuring the charging settings
Multimedia system:
© EQ Charging
4 5 5
Setting the charging program
Select Home, Work or Standard.
#
Opening and closing the socket flap using the
MMS
Press Open socket flap to open the socket
#
flap.
The charging process can be interrupted using
#
Cancel charging. The charging process is
ended and the charging cable is unlocked.
Press Close socket flap to close the socket
#
flap. The socket flap also closes automatically
when the transmission is shifted out of posi-
tion j.
%
Further notes on charging with alternating
current: ( page 219) or direct current:
/
( page 223).
/
Unlocking the charging cable (mode 3 or 4)
When the function is active, the charging cable is
unlocked when the maximum charge level is
reached.
Select Home or Work.
#
Activate or deactivate Unlock charging
#
Activating or deactivating location-based charging
Select Charge at home or Charge at
#
Activate or deactivate Select based on loca-
#
tion.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, the
charging program is automatically switched over
as soon as parking position j is engaged.
Activating or deactivating ECO charging
Activate or deactivate the function.
#
The ECO charging function limits the charging
voltage at charging stations to conserve the vehi-
cle's battery.
Setting the departure time
The set departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. The charging process
always starts immediately, irrespective of the next
cable.
departure time.
Select Departure
#
work.
The following charging times can be selected:
individual charging times
R
a Week profile
R
Setting an individual departure time
Select Add new time
#
time.
or
Select ´ and adapt an existing departure
#
time.
Setting the repeat days
Select Add new time
#
time.
Driving and parking 229
time.
and set a new departure
and set a new departure