Mercedes-Benz EQS 350 Operator's Manual page 226

Combo 2 vehicle socket
Press charging interruption button 2.
#
The charging process is ended. Status display
1 lights up white. The vehicle socket is
unlocked.
Remove the charging cable connector from
#
the vehicle socket within 30 seconds 3.
After the 30 seconds have elapsed, the vehicle
socket will be locked again and the charging
process will resume.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
%
Status display 1 indicator lamp remains lit
for some time after the charging cable con-
nector has been removed and then goes out.
Close the socket flap.
#
For vehicles with an electric socket flap,
observe the following notes on closing the
socket flap.
Remove the charging cable connector from
#
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi-
cle's charging cable safely in the vehicle
( page 211).
/
Driving and parking 223
The electric socket flap closes automatically in
the following situations:
shortly after the charging cable connector has
R
been removed
after the socket flap has been tapped in the
R
direction to close it
after transmission position i, h or k has
R
been engaged
Automatic reversing function of the electric
socket flap
If an obstacle impedes the electrical socket flap
while it is closing, the socket flap will open again
automatically.
When closing the socket flap, make sure that
#
no body parts or objects are in the closing
area.
Starting the direct current charging process
(mode 4)
& DANGER Risk of death when charging at a
damaged socket
The charging process uses high voltage.