Mercedes-Benz EQS 350 Operator's Manual page 411

408 Maintenance and care
Only use cleaning agents or cleaning cloths
R
that are suitable for plastic lenses.
Vehicle socket (high-voltage battery)
Use clean water and a soft cloth to clean the
R
vehicle socket.
Do not use high-pressure cleaners or cleaning
R
agents such as soap.
Sensors
Clean the sensors in the front and rear bump-
R
ers with a soft cloth and car shampoo
( page 237).
/
When using a high-pressure cleaner, maintain
R
a minimum distance of 30 cm.
Reversing camera and 360° camera
Open the camera cover with the multimedia
R
system ( page 292).
/
Use clean water and a soft cloth to clean the
R
camera lens.
Do not use a high-pressure cleaner.
R
Trailer hitch
Observe the notes on care in the trailer hitch
R
manufacturer's operator manual.
Do not clean the ball neck with a high-pres-
R
sure cleaner or solvent.
Remove traces of rust on the ball (e.g. using a
R
wire brush).
Remove dirt with a lint-free cloth.
R
After cleaning, lightly oil or grease the ball
R
head.
%
Before using trailers with anti-torsional cou-
pling, observe the manufacturer's operator
manual.
Notes on care of the interior
& WARNING Risk of injury from plastic parts
breaking off after the use of solvent-based
care products
Care and cleaning products containing sol-
vents can cause surfaces in the cockpit to
become porous. When the airbags are
deployed, plastic parts may break away.
Do not use any care or cleaning products
#
containing solvents to clean the cockpit.
& WARNING Risk of injury or fatal injuries
from bleached seat belts
Bleaching or dyeing seat belts can severely
weaken them.
This can, for example, cause seat belts to tear
or fail in an accident.
Never bleach or dye seat belts.
#
To avoid damage to the vehicle, observe the fol-
lowing notes on cleaning and care:
Seat belts
Clean with lukewarm and soapy water.
R
Do not use chemical cleaning agents.
R
Do not dry by heating them to over 80°C or
R
exposing them to direct sunlight.
Display
Switch off the display and let it cool down.
R
Clean the surface carefully with a microfibre
R
cloth and a suitable display care product (TFT-
LCD).
Do not use any other agents.
R