Mercedes-Benz EQS 350 Operator's Manual page 442

Removing and fitting the wheel trim/hub caps
Requirements:
The vehicle is prepared for a wheel change
R
( page 438).
/
Wheel trim
The wheel trim covers the wheel bolts on vehicles
with aluminium wheels. Before unscrewing the
wheel bolts, remove the wheel trim.
To remove: using both hands, carefully reach
#
into two wheel trim openings and remove the
wheel trim.
Raising the vehicle when changing a wheel
Requirements:
There are no persons in the vehicle.
R
The vehicle has been prepared for a wheel
R
change ( page 438).
/
Important notes on using the jack:
Use only a vehicle-specific jack that has been
R
approved by Mercedes-Benz to raise the vehi-
cle.
The jack is only designed for raising and hold-
R
ing the vehicle for a short time while a wheel
is being changed and not for maintenance
work under the vehicle.
The jack must be placed on a firm, flat and
R
non-slip surface. If necessary, use a large, flat,
load-bearing, non-slip underlay.
The foot of the jack must be positioned verti-
R
cally under the jack support point.
Wheels and tyres 439
Rules of conduct when the vehicle is raised:
Never place your hands or feet under the vehi-
R
cle.
Never lie under the vehicle.
R