Mercedes-Benz EQS 350 Operator's Manual page 239

236 Driving and parking
%
The electric parking brake is only securely
applied if the red ! indicator lamp is lit
continuously.
Releasing
Switch on the vehicle.
#
Pull handle 1.
#
The red ! indicator lamp in the driver's
display goes out.
Emergency braking
Press and hold handle 1.
#
As long as the vehicle is in motion, the
Release parking brake
message is displayed
and the red ! indicator lamp flashes.
When the vehicle has been braked to a stand-
still, the electric parking brake is applied. The
red ! indicator lamp lights up in the driv-
er's display.
Information on collision detection on a parked
vehicle
If a collision is detected when the tow-away pro-
tection is primed on a locked vehicle, you will
receive a notification in the multimedia system
when you switch the vehicle on.
You will receive information about the following
points:
The area of the vehicle that may have been
R
damaged.
The force of the impact.
R
The following situation can lead to inadvertent
activation:
The parked vehicle is moved, forexample, in a
R
two-storey garage.
% Deactivate tow-away protection in order to
prevent inadvertent activation. If you deacti-
vate tow-away protection, collision detection
will also be deactivated.
You can permanently deactivate collision
detection via the multimedia system
( page 236).
/
System limits
Detection may be restricted in the following situa-
tions:
the vehicle is damaged without impact,
R
forexample, if an outside mirror is torn off or
the paint is damaged by a key
an impact occurs at low speed
R
the electric parking brake is not applied
R
%
You are responsible for your vehicle. There-
fore, always make sure that your vehicle is
free of damage and is roadworthy.
Setting collision detection on a parked vehicle
Multimedia system:
© Settings Vehicle
4 5 5
Open/close Vehicle protection
5 5
Activate or deactivate the function via
#
sion notification.
Colli-