Mercedes-Benz EQS 350 Operator's Manual page 175

172 Light and sight
° Continuous wiping, slow
4
¯ Continuous wiping, fast
5
Turn the combination switch to the corre-
#
sponding position 1 - 5.
Single wipe/washing: push the button on the
#
combination switch in the direction of arrow
1.
í Single wipe
R
î Wipes with washer fluid
R
%
Observe the notes on washing the vehicle in a
car wash ( page 403).
/
Replacing the windscreen wiper blades
& WARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch off the windscreen wipers
#
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
Switch the vehicle on and then off again
#
immediately.
Within around 15 seconds, press the î
#
button on the combination switch for approx-
imately three seconds ( page 171).
/
The wiper arms will move into the replacement
position.
Removing the wiper blades
Fold the wiper arms away from the wind-
#
screen.
Hold the wiper arm with one hand. With the
#
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
far as it will go.
Press release knob 2.
#
Remove the wiper blade from the wiper arm in
#
the direction of arrow 3.
1
as