Mercedes-Benz EQS 350 Operator's Manual page 444

Take the ratchet out of the tyre-change tool kit
#
and place it on the hexagon nut of the jack so
that the letters "AUF" are visible.
Position support 2 of jack
#
port point 1.
Turn ratchet 3 clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the ground.
Turn ratchet
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised.
R
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
* NOTE Damage to the wheels' plastic ele-
4 on jack sup-
ments when changing a wheel
Plastic elements on wheels may be damaged
2
when removing and repositioning the wheel.
1 and
3 until the tyre is raised a maxi-
page 441).
/
Wheels and tyres 441
Do not raise the wheels by the plastic
#
elements when removing and reposition-
ing.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on a
#
dirty surface.
Unscrew the uppermost wheel bolt com-
#
pletely.