Mercedes-Benz EQS 350 Operator's Manual page 230

% If you cannot remove the charging cable con-
nector, unlock the vehicle and repeat the pro-
cedure. If the charging cable connector is still
locked, contact a qualified specialist work-
shop.
%
Status display 1 indicator lamp remains lit
for some time after the charging cable con-
nector has been removed and then goes out.
Insert socket cover 4 into the lower vehicle
#
socket connection.
Close the socket flap.
#
For vehicles with an electric socket flap,
observe the notes at the end of the section.
Combo 2 vehicle socket
Press charging interruption button 2.
#
The charging process is ended. Status display
1
lights up white. The vehicle socket is
unlocked.
Remove charging cable connector
#
the vehicle socket.
% If you cannot remove the charging cable con-
nector, unlock the vehicle and repeat the pro-
cedure. If the charging cable connector is still
locked, contact a qualified specialist work-
shop.
%
Status display
for some time after the charging cable con-
nector has been removed and then goes out.
Insert socket cover
#
socket connection.
Close the socket flap.
#
For vehicles with an electric socket flap,
observe the following notes on closing the
socket flap.
The electric socket flap closes automatically in
the following situations:
shortly after the charging cable connector has
R
been removed
after the socket flap has been tapped in the
R
direction to close it
3 from
after transmission position i, h or k has
R
been engaged
Driving and parking 227
1 indicator lamp remains lit
4 into the lower vehicle