Mercedes-Benz EQS 350 Operator's Manual page 53

50 Occupant safety
Fastening and adjusting seat belts
If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap can-
not be pulled out any further.
%
Vehicles with illuminated design seat belt
buckles: the illumination on the seat belt
buckle does not indicate that the seat belt
buckle is functioning correctly.
Always engage seat belt tongue
#
2
belt into seat belt buckle
sponding seat.
To adjust the seat belt height: press button
#
on the seat belt outlet and slide the seat belt
outlet to the desired position.
To engage the seat belt outlet: release button
#
3 and ensure that the seat belt outlet
engages.
% A seat belt can only provide the best level of
protection if it is worn correctly. Observe the
notes on fastening the seat belt (
* NOTE Deployment of components of the
restraint system when the front passenger
seat is unoccupied and a seat belt is
buckled
When the front passenger seat is unoccupied
and the seat belt tongue of the seat belt is
engaged in the seat belt buckle, components
of the restraint system may deploy unnecessa-
rily on the front passenger side, e.g. the seat
belt tensioner.
1 of the seat
Only buckle the seat belts as intended.
#
of the corre-
% Observe the notes on stowage areas
( page 134).
/
3
Information on fitting a child restraint system
and on children travelling in the vehicle can
be found in the "Children in the vehicle" sec-
tion (
/
Seat belt adjustment function
Vehicles with PRE-SAFE
page 47).
/
has been fastened, the automatic seat belt adjust-
ment may apply a certain tightening force. Do not
hold the seat belt tightly while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia system
( page 51).
/
page 66).
®
: after a front seat belt