Mercedes-Benz EQS 350 Operator's Manual page 223

220 Driving and parking
If the charging cable or charging cable
#
connector becomes too hot, have the
power supply system checked.
* NOTE Damaged or dirty vehicle socket
when the socket flap is open
Always keep the socket cover and the
#
socket flap closed when there is no
charging cable connected. This protects
the vehicle socket from dirt and damage.
Make sure that the socket cover is
#
closed properly before closing the socket
flap. This can otherwise result in damage
which may prevent the socket flap from
being opened again.
* NOTE Damage to the vehicle socket or the
charging cable connector due to incorrect
handling
Do not use excessive force (maximum 300 N)
to insert the charging cable connector into the
vehicle socket to the stop. You may otherwise
damage the vehicle socket, the charging cable
connector or their contacts.
If you feel there is increased resistance,
#
pull the charging cable connector out of
the socket and reinsert it.
Requirements:
The transmission is in position j.
R
The vehicle is unlocked or the distance
R
between the key and the vehicle does not
exceed 1 m.
The vehicle has not been started. The õ
R
display in the driver's display is off.
The charging cable is not taut.
R
%
Depending on the national version, the vehicle
is equipped with one of the following vehicle
sockets.
Combo 1 vehicle socket