Mercedes-Benz EQS 350 Operator's Manual page 225

222 Driving and parking
%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
Ending the alternating current charging process
(mode 2/3)
Requirements:
The distance between the key and the vehicle
R
does not exceed 1 m.
Combo 1 vehicle socket
Press charging interruption button 2.
#
The charging process is ended. Status display
1 lights up white. The vehicle socket is
unlocked.
Press and hold button 3 on the charging
#
cable connector and remove the charging
cable connector from the vehicle socket.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
Close the socket cover and the socket flap.
#
For vehicles with an electric socket flap,
observe the notes at the end of the section.
Remove the charging cable connector from
#
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi-
cle's charging cable safely in the vehicle
( page 211).
/