Mercedes-Benz EQS 350 Operator's Manual page 368

Setting the state of charge of the high-voltage bat-
tery when the charging station and destination
are reached
Select Z in the navigation module
#
( page 360).
/
Select Route.
#
Select Charge level at destination
#
level at charging stations.
Move the control knob to the left or right and
#
set the preferred state of charge in percent
(%).
The destination or charging station along the
route is reached with the set state of charge.
To reach a charging station, the system uses the
battery capacity, e.g. up to 10% residual energy
content (state of charge). You can increase this
state of charge on arrival at the charging station
and destination, e.g. to 25% at the charging sta-
tion and 50% at the destination.
% In the event of increased energy consumption
while driving, e.g. with headwind, the following
options are available on the system side:
The charging station is safely reached
R
even at states of charge of less than 10 %.
Navigation with Electric Intelligence
R
selects a closer charging station for the
or Charge
route.
%
If a charging facility is available at the destina-
tion, the state of charge can be lowered below
Min.
10 %. The
tral display. Make sure that the range monitor
is switched on.
Selecting a provider for charging stations
Select Z in the navigation module
#
( page 360).
/
Select Route.
#
Activate or deactivate
#
If the option is activated, only charging sta-
tions payable with Mercedes me Charge are
taken into account when selecting the charg-
ing station.
or
message appears on the cen-
Mercedes me Charge.
MBUX multimedia system 365
Activate All.
#
All charging stations known to the navigation
system are taken into account when calculat-
ing routes with Electric Intelligence, regardless
of the type of payment.
It may be necessary to register with the pro-
vider.
Switching the range monitor on or off
The activated range monitoring assists with mes-
sages on the driver and central display to ensure
safe arrival at the destination.
Select Z in the navigation module
#
( page 360).
/
Select Route.
#
Activate or deactivate Range
#
To reach the destination with the state of
charge set by the driver, the range is perma-
nently monitored when the option is switched
on.
%
This function is not available in all countries.
monitoring.