Mercedes-Benz EQS 350 Operator's Manual page 228

Combo 1 vehicle socket Combo 2 vehicle socket
Open socket flap 1 via the EQ module of the
#
multimedia system ( page 332).
/
or
Press the centre rear section of socket flap
#
1.
Socket flap 1 swings open and status display
2 lights up white.
Driving and parking 225
Vehicles with an electrical socket flap: if an obsta-
cle impedes the socket flap while it is opening,
the socket flap will close again automatically.
% When the vehicle is started (the õ display
is lit in the driver's display), socket flap
cannot be opened.
Remove socket cover 4 from the lower con-
#
nection of vehicle socket 3.
%
The CCS charging cable connector requires
both vehicle socket connections 3.
Insert the charging cable connector into vehi-
#
cle socket 3 to the stop.
Make sure that the charging cable is not taut
when inserted.
2
Status display flashes orange and, as soon
as the high-voltage battery is charged, blue.
%
When the charging sequence for the ambient
lighting is activated, the ambient lighting lights
up for approximately 30 seconds as with sta-
tus display 2 ( page 169).
/
1