Mercedes-Benz EQS 350 Operator's Manual page 229

226 Driving and parking
When Sound Experience is activated, different
situations, for example the charging cable
connector being inserted and removed or the
beginning of the charging process, are
accompanied by selected sounds. For infor-
mation on Sound Experience, please refer to
the Digital Owner's Manual.
Vehicles with an electric socket flap: if a charging
cable is not connected to the vehicle after the
socket flap has been opened, the socket flap will
close again automatically.
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charge
level display is shown in the driver's display with a
charging prediction. The charging prediction
refers to the time at which the high-voltage bat-
tery will be fully charged.
%
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
Ending the direct current charging process (mode
4)
Requirements:
The distance between the key and the vehicle
R
does not exceed 1 m.
Combo 1 vehicle socket
Press charging interruption button 2.
#
The charging process is ended. Status display
1 lights up white. The vehicle socket is
unlocked.
Press and hold button 3 on the charging
#
cable connector and remove the charging
cable connector from the vehicle socket.