Mercedes-Benz EQS 350 Operator's Manual page 220

Setting the maximum permissible charging cur-
rent for charging at a mains socket
* NOTE Overloading the mains socket due
to excessive charging current
If the charging current is too high, the fuse
could be tripped or the external mains supply
could overheat.
Ensure that the external mains supply
#
has been designed to handle the charg-
ing current provided.
For safety reasons, only use the charging
#
cable supplied with the vehicle or an
original Mercedes-Benz charging cable.
Mercedes-Benz thoroughly tests these
original charging cables for their suitabil-
ity for high-voltage charging of your vehi-
cle.
Purchase these parts at a Mercedes-
#
Benz Service Centre and obtain advice
there.
Check the maximum charging current
#
using the charging capacity shown in the
driver's display.
The charging cable supplied is set to a country-
specific maximum charging current value. When
charging abroad, the maximum value may exceed
the permitted value for that country.
Before charging at a mains socket, have the
#
maximum permissible charging current for the
relevant mains socket or the building inspec-
ted by a qualified electrician.
When abroad, observe the country-specific
#
laws when charging.
If you have questions concerning the charging
current or if there is a malfunction, please contact
a qualified specialist workshop.
Overview of the charging cable control panel
The charging cable control panel shows the cur-
rent status of the charging process.
Driving and parking 217
1 Supply voltage indicator
2 Charging process indicator
3
Temperature monitor indicator
4
Safety system indicator
1
Supply voltage indicator
Display Meaning
Lights up white The supply voltage is
connected.