Mercedes-Benz EQS 350 Operator's Manual page 173

Table of Contents

Advertisement

170 Light and sight
Adjusting the brightness
Select Brightness.
#
Adjust the brightness.
#
%
Depending on the ambient light conditions,
the ambient lighting will automatically switch
between day and night modes.
Activating the brightness for zones
Select Brightness.
#
Switch off
Link zones
.
#
The Direct,
Indirect
and
Accents
set separately.
%
The
Light strip
zone can also be set in vehi-
cles with active ambient lighting.
Activating effects
& WARNING Risk of an accident despite
activated effects of ambient lighting and
active ambient lighting
To use the Warning Assistance effects, the
respective functions must be activated in the
driver assist menu.
Make sure that the functions and assists
#
are switched on.
%
Observe the notes on driving systems and
your responsibility; you may otherwise fail to
recognise dangers (
Select Effects.
#
Activate the desired effect.
#
%
Depending on the vehicle equipment, different
effects are available.
zones can be
Operating feedback effects
Climate: If changes are made to the tempera-
R
ture setting in the vehicle, the colour of the
ambient lighting will change briefly.
Voice
assistant: For vehicles with active ambi-
R
ent lighting, the voice assistant is visually ani-
mated.
Interior/exterior
R
the vehicle, a special colour animation will
play.
Charging
sequence: The ambient lighting pro-
R
vides visual feedback on the different states of
page 237).
/
lighting: When you get into
charge when the vehicle is connected to or
disconnected from the charging station.
Warning assistance effects
Warning when
exiting: If an object is detected
R
in the blind spot while you are getting out of
the vehicle, the ambient lighting in the affec-
ted door will flash red.
Further information on the exit warning
(
page 276).
/
Active Lane Keeping
Assist: If there is a warn-
R
ing from Active Lane Keeping Assist, the
active ambient lighting will flash red.
Further information on Active Lane Keeping
Assist (
page 279).
/
Active Brake
Assist: If there is an Active Brake
R
Assist warning, the active ambient lighting in
the centre of the cockpit will flash bright red.
Further information on the Active Brake Assist
(
page 265).
/
Active Blind Spot
Assist: In vehicles with
R
active ambient lighting, the ambient lighting
on the affected side will flash red if there is a
warning from Active Blind Spot Assist.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eqs 450 4maticEqs 500 4maticEqs 450+Eqs 580 4matic

Table of Contents