Management Modes - ZyXEL Communications XGS2220 Series User Manual

Figure 1 Multi-Gigabit Application
See the following table for the cables required and distance limitation to attain the corresponding
speed.
Table 2 Cable Types
CABLE
Category 5
Category 5e
Category 6
Category 6a
Category 7
Note: Make sure to select the correct speed for the port in PORT > Port Setup.

1.1.2 Management Modes

NebulaFlex means you can set the Switch to operate in either standalone or cloud mode (but not both
at the same time).
Use the DHCP-assigned IP address to access the Web Configurator. To know the IP address, use the
NCC, the ZON utility, or the console port if available. You can also use the domain name "setup.zyxel" to
access the Web Configurator when you are directly connected to the Switch.
Note: Make sure your computer can connect to a DNS server through the Switch.
Use the Web Configurator to configure and manage the Switch directly in standalone mode or use
Nebula Control Center (NCC) to configure and manage the Switch in cloud mode. The Nebula Control
Center (NCC) is an alternative cloud-based network management system that allows you to remotely
Chapter 1 Getting to Know Your Switch
TRANSMISSION SPEED
100M
1G / 2.5G / 5G
5G / 10G
10G
10G
XGS2220 Series User's Guide
MAXIMUM DISTANCE BANDWIDTH CAPACITY
100 m
100 m
50 m
100 m
100 m
30
100 MHz
100 MHz
250 MHz
500 MHz
650 MHz