Add/Edit Mvr - ZyXEL Communications XGS2220 Series User Manual

Table 152 SWITCHING > Multicast > MVR (continued)
LABEL
Add/Edit
Delete

45.12.1 Add/Edit MVR

Use this screen to create or edit multicast VLANs and select the receiver ports and a source port for
each multicast VLAN.
To access this screen, click Add/Edit or select an existing entry and click Add/Edit in the SWITCHING >
Multicast > MVR screen.
Figure 220 SWITCHING > Multicast > MVR > Add/Edit
The following table describes the related labels in this screen.
Table 153 SWITCHING > Multicast > MVR > Add/Edit
LABEL
Active
Group Name
Multicast VLAN ID
Chapter 45 Multicast
DESCRIPTION
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new multicast VLAN or edit a selected one.
Select the entries that you want to remove, then click Delete to delete multicast VLANs.
DESCRIPTION
Enable the switch button to enable MVR to allow one single multicast VLAN to be shared
among different subscriber VLANs on the network.
Enter a descriptive name (up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ], or [ ,
]) for identification purposes.
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
XGS2220 Series User's Guide
304