ZyXEL Communications XGS2220 Series User Manual page 368

30/54-port gbe/sfp smart managed layer-3 switch
Table of Contents

Advertisement

GVRP
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for switches to
register necessary VLAN members on ports across the network. Enable this function to permit VLAN
groups beyond the local Switch.
Please refer to the following table for common IEEE 802.1Q VLAN terminology.
Table 196 IEEE 802.1Q VLAN Terminology
VLAN PARAMETER
VLAN Type
VLAN Administrative
Control
VLAN Tag Control
VLAN Port
56.2.0.2 Port VLAN Trunking
Enable VLAN Trunking on a port to allow frames belonging to unknown VLAN groups to pass through
that port. This is useful if you want to set up VLAN groups on end devices without having to configure the
same VLAN groups on intermediary devices.
Refer to the following figure. Suppose you want to create VLAN groups 1 and 2 (V1 and V2) on devices
A and B. Without VLAN Trunking, you must configure VLAN groups 1 and 2 on all intermediary switches C,
D and E; otherwise they will drop frames with unknown VLAN group tags. However, with VLAN Trunking
enabled on ports in each intermediary switch you only need to create VLAN groups in the end devices
(A and B). C, D and E automatically allow frames with VLAN group tags 1 and 2 (VLAN groups that are
unknown to those switches) to pass through their VLAN trunking ports.
Figure 266 Port VLAN Trunking
Chapter 56 VLAN
TERM
DESCRIPTION
Permanent VLAN
This is a static VLAN created manually.
Dynamic VLAN
This is a VLAN configured by a GVRP registration or de-registration
process.
Registration Fixed
Fixed registration ports are permanent VLAN members.
Registration
Ports with registration forbidden are forbidden to join the specified
Forbidden
VLAN.
Normal Registration
Ports dynamically join a VLAN using GVRP.
Tagged
Ports belonging to the specified VLAN tag all outgoing frames
transmitted.
Untagged
Ports belonging to the specified VLAN do not tag all outgoing
frames transmitted.
Port VID
This is the VLAN ID assigned to untagged frames that this port
received.
Acceptable Frame
You may choose to accept both tagged and untagged incoming
Type
frames, just tagged incoming frames or just untagged incoming
frames on a port.
Ingress filtering
If set, the Switch discards incoming frames for VLANs that do not
have this port as a member.
XGS2220 Series User's Guide
368

Advertisement

Table of Contents
loading

Table of Contents