Protection - ZyXEL Communications XGS2220 Series User Manual

Table 23 Wizard > Basic > Step 4 Summary (continued)
LABEL
Previous
Finish
Cancel

4.5.2 Protection

In Protection, you can set up loop guard and broadcast storm control.
In order to set up loop guard, please do the following. Click Wizard > Protection > Step 1 Loop Guard to
access this screen.
Figure 59 Wizard > Protection > Step 1 Loop Guard
Each field is described in the following table.
Table 24 Wizard > Protection > Step 1 Loop Guard
LABEL
Loop Guard
Select all ports
Next
Cancel
After clicking Next, the Broadcast Storm Control screen appears.
Chapter 4 Web Configurator
DESCRIPTION
Click Previous to show the previous screen.
Review the information and click Finish to create the task.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select all ports to enable the loop guard feature on all ports.
You can select a port by clicking it.
Click Next to show the next screen.
Click Cancel to exit this screen without saving.
XGS2220 Series User's Guide
82