Vlan; Chapter 56 Vlan; Vlan Overview; What You Can Do - ZyXEL Communications XGS2220 Series User Manual

56.1 VLAN Overview

This chapter shows you how to configure 802.1Q tagged and port-based VLANs.
The type of screen you see here depends on the VLAN Type you selected in the SYSTEM > Switch Setup
screen which is only available in standalone mode. The Switch does not support port-based VLANs in
Stacking mode.

56.1.1 What You Can Do

• Use the VLAN Status screen
• Use the VLAN Status Details screen
status of the static VLAN group.
• Use the Static VLAN Setup screen
• Use the VLAN Port Setup screen
settings on a port.
• Use the GVRP screen
• Use the Subnet Based VLAN Setup screen
group traffic into logical VLANs based on the source IP subnet you specify.
• Use the Protocol Based VLAN Setup screen
to group traffic into logical VLANs based on the protocol you specify.
• Use the Voice VLAN Setup screen
voice traffic with defined priority and enable the Switch port to carry the voice traffic separately from
data traffic to ensure the sound quality does NOT deteriorate.
• Use the MAC Based VLAN Setup screen
group untagged packets into logical VLANs based on the source MAC address of the packet. This
eliminates the need to reconfigure the Switch when you change ports. The Switch will forward the
packets based on the source MAC address you set up previously.
• Use the Vendor ID Based VLAN Setup screen
you to group untagged packets into logical VLANs based on the source MAC address of the packet.
You can specify a mask for the MAC address to create a MAC address filter and enter a weight to set
the VLAN rule's priority.

56.1.2 What You Need to Know

Read this section to know more about VLAN and how to configure the screens.
(Section 56.3 on page
(Section 56.3.1 on page
(Section 56.4 on page
(Section 56.5 on page
(Section 56.6 on page 375) to enable/disable GVRP on each port.
(Section 56.8 on page
(Section 56.9 on page
(Section 56.11 on page
(Section 56.12 on page
(Section 56.13.1 on page
XGS2220 Series User's Guide
366
C
H A P T E R
369) to view and search all static VLAN groups.
370) to view detailed port settings and
371) to configure a static VLAN for the Switch.
373) to configure the static VLAN (IEEE 802.1Q)
377) to set up VLANs that allow you to
378) to set up VLANs that allow you
381) to set up VLANs that allow you to group
383) to set up VLANs that allow you to
385) to set up VLANs that allow
56

VLAN