ZyXEL Communications XGS2220 Series User Manual page 557

Figure 416 Summary (example PoE model)
The following table describes the labels in this screen.
Table 321 SUMMARY
LABEL DESCRIPTION
Auto Refresh Click the Pause Auto Refresh or Resume Auto Refresh icon to stop or resume the screen update.
Port Status This chart displays the status of the Switch's front panel ports with connection (LED and Port).
Networked AV Information
IP Setup This link takes you to a screen where you can configure the IP address and subnet mask
(necessary for Switch management) and set up to 128 IP routing domains.
IGMP-Snooping This displays the ID number of the VLAN group upon which the Switch is to perform IGMP
VLAN snooping.
IGMP-Snooping This displays Active when IGMP snooping is enabled to forward group multicast traffic only to
ports that are members of that group.
Otherwise, it is Inactive.
IGMP-Querier This displays Active when the Switch is allowed to send IGMP General Query messages to the
VLANs with the multicast hosts attached.
Otherwise, it is Inactive.
IP Interface This displays the IP address of the Switch for it to be managed over the network.
Unknown This displays the action to perform when the Switch receives an unknown multicast frame.
Multicast
It displays Drop when the frames are discarded.
It displays Flooding when the frames are sent to all ports.
It displays Drop on VLAN when the frames are discarded on the specified VLANs.
Power Usage(W) For PoE models.
This chart displays the used PoE Watts over the total number of Watts provided on this Switch.
Chapter 79 Networked AV Mode
XGS2220 Series User's Guide
557