Ipv6 Prefix Setup; Add/Edit Ipv6 Prefix - ZyXEL Communications XGS2220 Series User Manual

30/54-port gbe/sfp smart managed layer-3 switch

Table of Contents

24.9 IPv6 Prefix Setup

Use this screen to configure the Switch's IPv6 prefix list for each interface. Click SYSTEM > IPv6 > IPv6

Neighbor Discovery > IPv6 Prefix Setup to display the screen as shown next.

Figure 131 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Prefix Setup

The following table describes the labels in this screen.

Table 73 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Prefix Setup

Valid Lifetime

Preferred Lifetime

Use this screen to configure the Switch's IPv6 prefix list for each interface. Click Add/Edit, or select an

entry and click Add/Edit in the SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Prefix Setup screen to

display this screen.

Figure 132 SYSTEM > IPv6 > IPv6 Neighbor Discovery > IPv6 Prefix Setup > Add/Edit

Chapter 24 IPv6

This is the interface index number.

This is the name of the IPv6 interface you created.

This field displays the IPv6 prefix and prefix length that the Switch includes in router

advertisements for this interface.

This field displays the IPv6 prefix valid lifetime.

This field displays the preferred lifetime of an IPv6 address generated from the prefix.

Select an entry's check box to select a specific entry. Otherwise, select the check box in

the table heading row to select all entries.

Click Add/Edit to add a new entry or edit a selected one.

Click Delete to remove the selected entries.

XGS2220 Series User's Guide