ZyXEL Communications XGS2220 Series User Manual page 80

Table 21 Wizard > Basic > Step 2 Password (continued)
LABEL DESCRIPTION
Trap Community Enter the Trap Community string, which is the password sent with each trap to the SNMP
manager.
The Trap Community string is only used by SNMP managers using SNMP version 2c or lower.
Previous Click Previous to show the previous screen.
Next Click Next to show the next screen.
Cancel Click Cancel to exit this screen without saving.
After clicking Next, the Link Aggregation screen appears.
Figure 57 Wizard > Basic > Step 3 Link Aggregation
Each field is described in the following table.
Table 22 Wizard > Basic > Step 3 Link Aggregation
LABEL DESCRIPTION
Link Aggregation
T1-Tx Click the arrows to add or delete icons located on the left to desired preference.
Select Static if the ports are configured as static members of a trunk group.
Select LACP if the ports are configured to join a trunk group through LACP.
Previous Click Previous to show the previous screen.
Next Click Next to show the next screen.
Cancel Click Cancel to exit this screen without saving.
After clicking Next, the Summary screen appears.
Chapter 4 Web Configurator
XGS2220 Series User's Guide
80