Add/Edit A Vlan Isolation Rule - ZyXEL Communications XGS2220 Series User Manual

30/54-port gbe/sfp smart managed layer-3 switch

Table of Contents

The following table describes the labels in this screen.

Table 214 SWITCHING > VLAN Isolation

Promiscuous Ports

57.2.1 Add/Edit a VLAN Isolation Rule

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > VLAN Isolation screen to display

this screen.

The following table describes the labels in this screen.

Table 215 SWITCHING > VLAN Isolation > Add/Edit

Promiscuous Ports

Chapter 57 VLAN Isolation

SWITCHING > VLAN Isolation

This is the index number of the rule.

This shows whether this rule is activated or not.

This is the descriptive name for this rule.

This is the VLAN to which this rule is applied.

This shows the ports that can communicate with any ports in the same VLAN.

Select an entry's check box to select a specific entry. Otherwise, select the check box in the

table heading row to select all entries.

Click Add/Edit to add a new entry or edit a selected one.

Click Delete to remove the selected entries.

SWITCHING > VLAN Isolation > Add/Edit

Enable the switch button to enable VLAN Isolation in a VLAN.

Enter a descriptive name (up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ ,

]) for identification purposes.

Enter a VLAN ID from 1 to 4094. This is the VLAN to which this rule applies.

Enter the number of the ports that can communicate with any ports in the same VLAN.

Other ports belonging to this VLAN will be added to the isolation list and can only send and

receive traffic from the ports you specify here.

XGS2220 Series User's Guide