Add/Edit A Voice Vlan - ZyXEL Communications XGS2220 Series User Manual

Figure 281 SWITCHING > VLAN > Voice VLAN Setup
The following table describes the fields in the above screen.
Table 207 SWITCHING > VLAN > Voice VLAN Setup
LABEL
Voice VLAN Global Setup
Voice VLAN
Priority
Apply
Cancel
Voice VLAN OUI Setup
Index
OUI Address
OUI Mask
Description
Add/Edit
Delete

56.11.1 Add/Edit a Voice VLAN

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > VLAN > Voice VLAN Setup
screen to display the configuration screen.
Chapter 56 VLAN
DESCRIPTION
Click the second radio button if you want to enable the Voice VLAN feature. Type a
VLAN ID number in the box next to the radio button that is associated with the Voice
VLAN. You also need to create a static VLAN with the same VID in the SWITCHING > VLAN
> VLAN Setup > Static VLAN screen, and then connect the IP phone with the specified
OUI MAC address to a port that joins the static VLAN.
Click Disable radio button if you do not want to enable the Voice VLAN feature.
Select the priority level of the voice traffic from 0 to 7. Default setting is 5. The higher the
numeric value you assign, the higher the priority for this voice traffic.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this section afresh.
This field displays the index number of the Voice VLAN.
This field displays the OUI address of the Voice VLAN.
This field displays the OUI mask address of the Voice VLAN.
This field displays the description of the Voice VLAN with OUI address.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entry.
XGS2220 Series User's Guide
382