ZyXEL Communications XGS2220 Series User Manual page 487

Figure 357 SECURITY > IPv4 Source Guard > IP Source Guard > Static Binding
The following table describes the labels in this screen.
Table 278 SECURITY > IPv4 Source Guard > IP Source Guard > Static Binding
LABEL DESCRIPTION
ARP Freeze
ARP Freeze allows you to automatically create static bindings from the current ARP entries (either dynamically
learned or static ARP entries) until the Switch's binding table is full.
Note: The ARP learning mode should be set to ARP-Request in the NETWORKING > ARP Setup > ARP
Learning screen before you use the ARP Freeze feature.
Condition All – Select this and click ARP Freeze to have the Switch automatically add all the current ARP
entries to the static bindings table.
Port List – Select this and enter the number of the ports (separated by a comma).
You can enter multiple ports separated by (no space) comma (,) or hyphen (-) for a range.
For example, enter "3-5" for ports 3, 4, and 5. Enter "3,5,7" for ports 3, 5, and 7.
ARP entries learned on the specified ports are added to the static bindings table after you
click ARP Freeze.
VLAN List – Select this and enter the ID number of the VLANs (separated by a comma). ARP
entries for the specified VLANs are added to the static bindings table after you click ARP
Freeze.
Static Binding
Index This field displays a sequential number for each binding.
IP Address This field displays the IP address assigned to the MAC address in the binding.
VID This field displays the source VLAN ID in the binding.
MAC Address This field displays the source MAC address in the binding.
Port This field displays the port number.
Lease This field displays how long the binding is valid.
Type This field displays how the Switch learned the binding.
Static: This binding was learned from information provided manually by an administrator.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entries.
Chapter 73 IP Source Guard
XGS2220 Series User's Guide
487