Vendor Id Based Vlan; Add/Edit A Vendor Id Based Vlan - ZyXEL Communications XGS2220 Series User Manual

56.13 Vendor ID Based VLAN

The Vendor ID based VLAN feature assigns incoming untagged packets to a VLAN and classifies the
traffic based on the source MAC address of the packet. When untagged packets arrive at the switch,
the source MAC address of the packet is looked up in a Vendor ID to VLAN mapping table. If an entry is
found, the corresponding VLAN ID is assigned to the packet. The assigned VLAN ID is verified against the
VLAN table. If the VLAN is valid, ingress processing on the packet continues; otherwise, the packet is
dropped.
This feature allows users to change ports without having to reconfigure the VLAN. You can assign a
802.1p priority to the vendor ID based VLAN and define a vendor ID to VLAN mapping table by entering
a specified source MAC address and mask in the vendor ID based VLAN setup screen. You can also
delete a vendor ID based VLAN entry in the same screen.
For every vendor ID based VLAN rule you set, you can specify a weight number to define the rule's
priority level. As rules are processed one after the other, stating a priority order will let you choose which
rule has to be applied first and which second.
Click the SWITCHING > VLAN > Vendor ID Based VLAN Setup to see the following screen.
Figure 285 SWITCHING > VLAN > Vendor ID Based VLAN Setup
The following table describes the fields in the above screen.
Table 211 SWITCHING > VLAN > Vendor ID Based VLAN Setup
LABEL
Index
Name
MAC Address
Mask
VLAN
Priority
Weight
Add/Edit
Delete

56.13.1 Add/Edit a Vendor ID Based VLAN

Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > VLAN > Vendor ID Based VLAN
Setup to see this screen.
Chapter 56 VLAN
DESCRIPTION
This field displays the index number of the vendor ID based VLAN entry.
This field displays the name of the vendor ID based VLAN entry.
This field displays the source MAC address that is bind to the vendor ID based VLAN entry.
This field displays the mask for the source MAC address that is bind to the vendor ID based
VLAN entry.
This field displays the VLAN ID of the vendor ID based VLAN entry.
This field displays the priority level which is assigned to frames belonging to this vendor ID
based VLAN.
This field displays the weight of the vendor ID based VLAN entry.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entry.
XGS2220 Series User's Guide
385