Save Configuration - ZyXEL Communications XGS2220 Series User Manual

To access this screen, click MAINTENANCE > Configuration > Backup Configuration in the navigation
panel.
Figure 458 MAINTENANCE > Configuration > Backup Configuration
Follow the steps below to back up the current Switch configuration to your computer in this screen.
Select which Switch configuration file you want to download to your computer.
1
Click Backup.
2
If the current configuration file is open and/or downloaded to your computer automatically, you can
3
click File > Save As on your computer to save the file to a specific place.
If a dialog box pops up asking whether you want to open or save the file, click Save or Save File to
download it to the default downloads folder on your computer. If a Save As screen displays after you
click Save or Save File, choose a location to save the file on your computer from the Save in drop-down
list box and type a descriptive name for it in the File name list box. Click Save to save the configuration
file to your computer.

79.45 Save Configuration

To access this screen, click MAINTENANCE > Configuration > Save Configuration in the navigation panel.
Click Current Configuration to save the current configuration settings permanently to the Switch. This
configuration is set up according to your network environment.
Click Custom Default to save the current configuration settings permanently to a customized default file
on the Switch.
Figure 459 Maintenance > Configuration > Save Configuration
Note: If a customized default file was not saved, clicking Custom Default loads the factory
default configuration on the Switch.
Alternatively, click Save on the top right in any screen to save the configuration changes to the current
configuration.
Note: Clicking the Apply button after making configuration does NOT save the changes
permanently. All unsaved changes are erased after you reboot the Switch.
Chapter 79 Networked AV Mode
XGS2220 Series User's Guide
612