ZyXEL Communications XGS2220 Series User Manual page 637

Select the Internet Protocol Version 6 (TCP/IPv6) check box to enable it.
4
Click OK to save the changes for the selected network adapter.
5
Click OK to exit the selected network adapter Properties screen.
6
Example – Enabling DHCPv6 on Windows 10
Windows 10 supports DHCPv6 by default. To enable DHCPv6 client on your computer:
Select Start > Settings > Network & Internet.
1
On the left side of the Network & Internet, select Ethernet. Then select the Ethernet network you are
2
connected to.
Under IP assignment, select Edit.
3
Under Edit IP settings, select Automatic (DHCP) or Manual. Then click Save.
4
• When you select Automatic (DHCP), the IP address settings and DNS server address setting are set
automatically by your router.
• When you select Manual, you can manually set your IP address settings and DNS server address.
Now your computer can obtain an IPv6 address from a DHCPv6 server.
Appendix C IPv6
XGS2220 Series User's Guide
637