Note
Setting up the skipping configuration for external
Steps
Option
Default option
46
The available options for Peak Over field are
limited within the selected options from the V-
Range and I-Range sections above.
1. Press Setup button.
2. Press V / I Range soft key.
3. Press Enter button.
4. Press down arrow key to move
cursor to Skipping Config field.
5. Use soft keys to select and confirm
the desired option.
On
It is able is skip certain measurement
range(s) that are not used by turning on
this feature for external input. It can reduce
measured data loss which occurs while
ranges are switched.
Off
Turn off the function.
Off
T3PM1100 User Manual
Setup
Enter