Teledyne Everywhereyoulook T3PM1100 User Manual page 212

The following table describes the Status Byte Register.
Bit Name
0 Not Used
1 Not Used
2 Error
Queue
3 Extended
Event
4 Message
Available
5 Standard
Event
6 Request
Service
7 Not Used
212
Decimal
1 (Reserved for future use)
2 (Reserved for future use)
4 One or more errors have been stored in the
Error Queue. Use STAT:ERR? to read and
delete errors.
8 One or more bits are set in the Extended
Event Register (bits must be enabled, see
STAT:EESE).
16 Data is available in the instrument's output
buffer.
32 One or more bits are set in the Standard
Event Register (bits must be enabled, see
*ESE).
64 One or more bits are set in the Status Byte
Register and may generate a Request for
Service (RQS). Bits must be enabled using
*SRE.
128 (Reserved for future use)
T3PM1100 User Manual
Definition