Setting up the voltage and current skipping configuration
Steps
Option
Default option
Steps
1. Press Setup button.
2. Press V / I Range soft key.
3. Press Enter button.
4. Press down arrow key to move
cursor to the Mode field.
5. Use soft keys to select and confirm
the desired option.
Menu When user is configuring range setting, the
measured data will Not be displayed.
Quick The measured data will be displayed
simultaneously while measurement range
is being switched by user. This is practical
for frequent switch of measurement range.
Menu
6. Press down arrow key to move
cursor to Skipping Config field.
BASIC SETTING
Setup
Enter
43