Integration - Teledyne Everywhereyoulook T3PM1100 User Manual

Measurement range
Frequency filter
Accuracy

Integration

Item
Mode
Timer
Accuracy
Range setting
Timer accuracy
Remote control
206
20 s
Auto ( * )
( * ) Limit of the measurement lower limit frequency
by the Timeout setting
Timeout
1 s
5 s
10 s
20 s
Auto switching among six types: 100mHz, 1 Hz, 10
Hz, 100 Hz, 1 kHz, 10 kHz, and 100 kHz.
Select OFF or ON (cut off frequency of 500 Hz)
Requirements
± (0.06% of reading)
Specifications
Select manual integration mode, standard integration
mode, or repetitive integration mode.
Automatically stop integration by setting a timer.
Selectable range: 0 hours 00 minutes 00 seconds to
9999 hours 59 minutes 59 seconds
±(Power accuracy (or current accuracy) + 0.1% of
reading) (fixed range)
Auto range or fixed range is available for Integration
±0.02%
Start, stop and reset operations are available using
an external remote signal. (option)
T3PM1100 User Manual
0.1 Hz ≤ f ≤ 100 kHz
0.1 Hz ≤ f ≤ 100 kHz
lower limit frequency
2.0 Hz
0.5 Hz
0.2 Hz
0.1 Hz
When the input signal level is
30% or more of the
measurement range If the
crest factor is set to 3.
(60% or more if the crest
factor is set to 6 or 6A)
• Frequency filter is ON when
measuring voltage or current
of 200 Hz or less.