Setting Up Average Function - Teledyne Everywhereyoulook T3PM1100 User Manual

Setting up average function

Steps
Option
Default value
Steps
1. Press Setup button.
2. Press Average soft key.
3. Press Enter button.
4. Press down arrow key to move cursor
to the State field.
5. Use soft keys to select and confirm the
desired option.
On Turn Average function On for either Linear
or Exponential averages of numeric data. It
is particularly practical for large changes in
load or power of low input signal frequency.
Off Turn off Average function.
Off
6. Press down arrow key to move cursor
to Type field.
BASIC SETTING
Setup
Enter
41