[:Input]:Current:extsensor:pojump<X; [:Input]:Current:sratio:element1<X - Teledyne Everywhereyoulook T3PM1100 User Manual

Example
[:INPut]:CURRent:EXTSensor:POJump<x>
Description
Syntax
Query Syntax
Parameter/
Return parameter
Example
[:INPut]:CURRent:SRATio:ELEMent1<x>
Description
Syntax
Query Syntax
Parameter/
Return parameter
152
:INPUT:CURRENT:EXTSENSOR:CONFIG1 2,0.5,0.1
:INPUT:CURRENT:EXTSENSOR:CONFIG1?
->:INPUT:CURRENT:EXTSENSOR:CONFIG1
2.00E+00,500.0E-03,100.0E-03
Sets or returns the jump destination range that is
used when a current peak over-range occurs.
[:INPut]:CURRent:EXTSensor:POJump<x>
{OFF|<Voltage>}
[:INPut]:CURRent:EXTSensor:POJump<x>?
<x> 1,2(EXT1,EXT2), If <x> is omitted, by
default sets or returns EXT2 config.
OFF No jump destination current range.
<Voltage> See(:INPut:CURRent:RANGe).
:INPUT:CURRENT:EXTSENSOR:POJUMP1 2V
:INPUT:CURRENT:EXTSENSOR:POJUMP1?
->:INPUT:CURRENT:EXTSENSOR:POJUMP1
2.00E+00
Sets or returns the external current sensor
conversion ratio of the specified element.
[:INPut]:CURRent:SRATio:ELEMent1<x> {<NRf>}
[:INPut]:CURRent:SRATio:ELEMent1<x>?
<x> 1,2(EXT1,EXT2), If <x> is omitted, by
default sets or returns EXT2 config.
<NRf> 0.001 to 9999
T3PM1100 User Manual
Set
Query
Set
Query