Configure Remote Control Interface; Configure Usb Interface - Teledyne Everywhereyoulook T3PM1100 User Manual

Configure Remote Control Interface

Configure USB Interface

USB CDC Class
Background
Steps
USB
Configuration
Due to the USB port configured to CDC
(Communications Device Class) by default, the
T3PM1100 will appear as a virtual COM port to a
connected PC. Before, hence, using remote control
via CDC USB class, install the appropriate CDC USB
driver available for download on the Teledyne
LeCroy website.
Continue the following setting from SYSTEM
CONFIG setting screen
1. Press Enter button.
2. Press down arrow key to move
cursor to I/O Model field.
3. Use soft keys to select and confirm
the USB option.
PC connector
T3PM1100 connector
Speed
USB Class
Hardware flow control Off
REMOTE CONTROL
Type A, host
Rear panel Type B, slave
1.1/2.0 (full speed/high
speed)
CDC (Communications
device class)
Enter
109