Setting Up Data Update Rate - Teledyne Everywhereyoulook T3PM1100 User Manual

Setting up data update rate

Steps
Option
Default value
Steps
1. Press Setup button.
2. Press Enter button.
3. Press down arrow key to move
cursor to the Data Update Rate field.
4. Use soft keys to select and confirm
the desired option. Press the
"More" soft keys to toggle among
pages for further options.
0.1s/0.25s/ Measured value is updated in
0.5s/1s/2s/ accordance with the designated time
5s/10s/20s interval. The Update 5s status icon, for
example, on the display lights up in
green when 5s option is selected.
Auto Data is only updated when a set
period (Time Out) of the input
waveform is detected.
0.25s
5. When Auto is selected, press right
arrow key to move cursor to Time
Out field.
BASIC SETTING
Setup
Enter
Enter
37