[:Input]:Current:pojump; [:Input]:Current:extsensor:config<X - Teledyne Everywhereyoulook T3PM1100 User Manual

Example

[:INPut]:CURRent:POJump

Description
Syntax
Query Syntax
Parameter/
Return parameter
Example
[:INPut]:CURRent:EXTSensor:CONFig<x>
Description
Syntax
Query Syntax
Parameter/
Return parameter
:INPUT:CURRENT:CONFIG 20,10,1
:INPUT:CURRENT:CONFIG?
->:INPUT:CURRENT:CONFIG 20.0E+00,10.0E+00,
1.0E+00
Sets or returns the jump destination range that is
used when a current peak over-range occurs.
[:INPut]:CURRent:POJump {OFF|<Current>}
[:INPut]:CURRent:POJump?
OFF No jump destination current range.
<Current > See(:INPut:CURRent:RANGe).
:INPUT:CURRENT:POJUMP 20A
:INPUT:CURRENT:POJUMP?
->:INPUT:CURRENT:POJUMP 20.0E+00
Sets or returns the valid external current sensor
range.
[:INPut]:CURRent:EXTSensor:CONFig<x>
{ALL|<Voltage>[,Voltage]...}
[:INPut]:CURRent:EXTSensor:CONFig<x>?
<x> 1,2(EXT1,EXT2), If <x> is omitted, by
default sets or returns EXT2 config.
ALL All ranges are valid.
<Voltage> See(:INPut:CURRent:RANGe).
COMMAND OVERVIEW
Set
Query
Set
Query
151