Table of Contents
Advertisement
Configure EOL Character
Description
Return to Local Control
Background
Procedure
The system config menu can set the EOL(end-of-
line) character for return message.
(The USB and LAN's EOL character is fixed with
CR+LF)
The EOL characters that can be received from the
PC include CR+LF, LF+CR, CR or LF. The most
common EOL character is CR+LF.
When the unit is in remote control mode, the
RMT icon above the main display can be seen.
When this icon is not displayed, it indicates that
the unit is in local control mode.
1. Press the Local key when in remote mode.
2. The unit will go back into local mode and the
RMT icon will turn off.
REMOTE CONTROL
115
Advertisement
Chapters
Table of Contents
