Status:qenable; Status:qmessage - Teledyne Everywhereyoulook T3PM1100 User Manual

Note

:STATus:QENable

Description
Syntax
Query Syntax
Parameter
Return parameter 0
Example

:STATus:QMESsage

Description
Syntax
Query Syntax
Parameter
Return parameter 0
190
• Set how each bit in the condition register must
change to trigger the setting of an event.
• For information about the condition register, see
Appendix,"Status system" at page 209.
Sets or returns whether messages other than
errors will be stored to the error queue (ON) or
not (OFF).
:STATus:QENable {<Boolean>|OFF|ON}
:STATus:QENable?
<Boolean>0 OFF
<Boolean>1 ON
Function is off.
1
Function is on.
:STATUS:QENABLE ON
:STATUS:QENABLE?
-> :STATUS:QENABLE 1
Sets or returns whether message information will
be attached to the response to the STATus:ERRor?
query (ON/OFF).
:STATus:QMESsage {<Boolean>|OFF|ON}
:STATus:QMESsage?
<Boolean>0 OFF
<Boolean>1 ON
Function is off.
1
Function is on.
T3PM1100 User Manual
Set
Query
Set
Query