Teledyne Everywhereyoulook T3PM1100 User Manual page 210

The extended event register receives information about changes in the
condition register, which indicates the instrument's internal condition.
The information is the result of edge detection performed by the
transition filter.
The following table lists the bit definitions for the condition register:
Bit Name
0 Updating
1 Integrate Busy
2 Integrate Time Busy
3 Not Used
4 Frequency Over
5 Store Busy
6 Measured Data Over
7 Voltage Peak Over
8 Current Peak Over
9 Not Used
10 Not Used
11 Not Used
12 Not Used
13 Not Used
14 Not Used
15 Not Used
210
Decimal
1 The measured data is being
updated. UPD changing from 1 to
0 indicates that updating has been
completed.
2 During integration.
4 The integration timer is operating.
8 (Reserved for future use)
16 The frequency is outside the
measurement range.
32 During storage.
64 The voltage or current exceeds its
range.
128 A peak over-range is detected in
the voltage.
256 A peak over-range is detected in
the current.
512 (Reserved for future use)
1024 (Reserved for future use)
2048 (Reserved for future use)
4096 (Reserved for future use)
8192 (Reserved for future use)
16384 (Reserved for future use)
32768 (Reserved for future use)
T3PM1100 User Manual
Definition