Example
:COMMunicate:STATus
Description
Query Syntax
Return parameter
(each status bit)
Example
Note
:COMMunicate:VERBose
Description
Syntax
Query Syntax
Parameter
Return parameter 0
:COMMUNICATE:REMOTE ON
:COMMUNICATE:REMOTE?
->:COMMUNICATE:REMOTE 1
Returns and clears the line-specific status.(Only
for RS-232)
:COMMunicate:STATus?
Bit 0
Parity error.
Bit 1
Framing error.
Bit 2
Noise error Break character detection.
Bit 3 and
Always zero.
higher
:COMMUNICATE:STATUS?
->0
• When an event occurs, the corresponding bit is set
in the status.
• When the bit is read, it is cleared.
• Zero is returned for interfaces other than RS-232.
Sets or returns whether the response to a query is
returned fully spelled out or in its abbreviated
form.
:COMMunicate:VERBose {<Boolean>|OFF | ON}
:COMMunicate:VERBose?
<Boolean>0 OFF
<Boolean>1 ON
Turn the verbose function off.
COMMAND OVERVIEW
Query
Set
Query
135