Setting Up The Hardcopy And Log Configuration - Teledyne Everywhereyoulook T3PM1100 User Manual

Option
Default option

Setting up the hardcopy and log configuration

Steps
1 - 4 There are 4 sets of internal memories for
saving and loading setup parameters. The
State field below indicates the status of
selected memory set.
Free represents the set is empty without
saved parameters, whereas Saved
indicates the set has been stored with
setup parameters.
1
1. Press Setup button.
2. Press Page 1/2 soft key.
3. Press Hardcopy soft key.
4. Press Enter button.
5. Press down arrow key to move
cursor to the Type field.
6. Use soft keys to select and confirm
the desired option.
BASIC SETTING
Setup
Enter
57