Teledyne Everywhereyoulook T3PM1100 User Manual page 78

Mode
78
Press the Mode button to select
measurement mode. There are 4
Mode
measurement modes.
AC+DC: Displays all the components

of measurement signal.
DC: Displays the DC part of the

measurement signal.
AC: Displays the AC part of the

measurement signal.
V-MEAN: Displays the voltage

rectified as a mean value that is
calibrated to RMS value. The value is
the same as those obtained from RMS
mode when sine waves are measured,
but it is different when DC or
distorted waves are measured.
T3PM1100 User Manual