SEN02738-00
Installation
1.
When turning over swing jaw plate (4), lower it
to the stand. Install the wires on the opposite
side and insert the swing jaw plate in the
crusher frame.
When replacing swing jaw plate (4), lower it to
the stand. Sling a new swing jaw plate with the
wires and insert it in the crusher frame.
2. Install swing jaw plate wedge (2) and swing jaw
plate wedge bolt (1). Set length (L) of the
swing jaw plate wedge spring to 108 – 110 mm.
6
50 Disassembly and assembly
BR380JG-1E0