Komatsu Galeo BR380JG-1E0 Shop Manual page 230

10 Structure, function and maintenance standard
Display
Symbol
section
Monitor
Service
meter
*1. The displayed clearance and the measured
clearance may not be the same.
*2. In the semiautomatic (S) mode, the quantity of
adjustment of the clearance is displayed. If the
clearance is set toward the + side (– side), it is
increased (decreased).
In the automatic (A) mode, the clearance to be
set is displayed.
BR380JG-1E0
Displayed item
Working mode In working mode
In travel mode
Travel speed
Lo, Mi, Hi
In inspection mode
Inspection mode
A, S, M
Actual crusher
In inspection mode
clearance monitor
Set crusher clear- In inspection mode
ance monitor (A, S)
Condition of each Displayed in working
device mode
Service meter While service meter
indicator is in operation
Display range
Set mode is displayed.
Set mode is displayed.
Set mode is displayed.
Actual crusher clearance is
displayed. (*1)
Set crusher clearance is
displayed. (*2)
Condition of each device is
displayed.
Lights up while service meter
is in operation.
SEN01355-00
Display method
37