SEN01355-00
Display and function of screen
Travel mode/Work mode
The monitor screen is set in the travel mode,
q
work mode, or inspection mode with mode
selector switch (1) on the control panel.
Travel mode
If travel mode (A) is selected with mode selec-
q
tor switch (1) on the main panel and speed
selector switch (2) on the upper control panel
is changed, Lo (Low-speed travel) or Hi (Hi-
speed travel) is displayed.
42
10 Structure, function and maintenance standard
Work mode
If work mode (B) is selected with the mode selector
switch (1), you can check the operating condition of
each work equipment and find out the work equip-
ment receiving an overload or abnormal load.
1.
Mode selector switch
2.
Side conveyor condition lamp
3.
Feeder condition lamp
4.
Crusher condition lamp
5.
Magnetic separator condition lamp
6.
Conveyor condition lamp
7.
Vibratory screen condition lamp
8.
Secondary conveyor condition lamp
BR380JG-1E0