Komatsu Galeo BR380JG-1E0 Shop Manual page 237

10 Structure, function and maintenance standard
3. Automatic (A)
1) Just after this screen appears, the cursor
is at clearance set settle monitor (11).
2) Depress UP switch (5) or DOWN switch
(6) of the monitor to bring the cursor to
crusher clearance set value monitor (12).
3) Depress settle switch (7), and clearance
set value (12) lights up.
4) Depress UP switch (5) or DOWN switch
(6) of the monitor to bring the cursor to the
clearance set settle monitor and depress
the settle switch (7).
5) Clearance set value (12) flashes and the
clearance is increased or decreased as
explained below.
i The crusher clearance is decreased
until the swing tooth touches the fixed
tooth.
ii The crusher clearance is increased to
crusher clearance set value (12).
iii When actual crusher clearance (10)
becomes larger than crusher clear-
ance set value (12), the automatic
clearance adjustment is finished.
6) While the crusher clearance is increasing,
(9) flashes. While the former is decreas-
ing, (8) flashes.
BR380JG-1E0
a The input range of crusher clearance
set value (12) is 50 – 150 mm. When
settle switch (7) is depressed, if the
input value is out of the above range,
it is returned to the former value.
SEN01355-00
45