30 Testing and adjusting
7.
Install the fixed jaw wedge, fixed jaw wedge bolt, and fixed jaw wedge bolt spring cover assembly.
When the fixed jaw wedge is installed to the fixed jaw plate, the wedge may not sit well with the plate
due to burrs remaining on the contact face of either parts. In that case, remove the burrs before install-
ing the wedge. If it is left unstable with burrs remaining, the wedge securing bolt may loosen during the
initial running-in period of crushing operation and the machine may be damaged.
Condition of wedge sitting (1): Unstable
q
Condition of wedge sitting: After initial running-in period of crushing operation
q
BR380JG-1E0
Spring set length increases. D > C
SEN02305-01
23